Bonsai Shoes Modern Semi Cascade Octagon Plastic Training Pot
Bonsai Shoes Modern Semi Cascade Octagon Plastic Training Pot
Couldn't load pickup availability
The Modern Semi Cascade is a sleek looking pot with a simple modern feel. The walls continue to the bottom of the pot, with a single drainage/air hole in the bottom perimeter wall for air and water exchange.
Air-pruning mesh bottom. The raised mesh bottom maximizes drainage and root growth: water and oxygen flow freely while the walls help keep the soil from drying too fast, and roots air-prune into a finer root system.
- Premium PETG — strong, with excellent water, chemical and UV resistance, and it insulates roots from heat and cold (only about 10–15% more brittle in freezing weather)
- Designed and 3D printed in the USA by Bonsai Shoes — 3D printing needs no molds, so we can offer sizes and shapes traditional manufacturing can't
- Sizes: the size number is the pot's largest outside dimension in inches (a Size 8 is 8″ wide)
Three ways to use it: on a solid surface (roots grow through the mesh for extra vigor — trim them at least once a year so they don't clog the mesh); on a mesh or grated surface (full air pruning — the ideal fine root system); or on soil or substrate (maximum growth while keeping a root ball in a small pot).

Printed to order just for you. Production time depends on current demand and printer availability — if timing matters, contact us for a current estimate before ordering.
Print it yourself? This design is also available as a print-ready file with our tuned Bambu settings: Print-It-Yourself Designs
Which tray fits this pot?
Measured from the production files: pot feet must sit on the tray's flat inside floor with room to spare. Shallow and Deep trays have the same inside floor size; Deep holds more water. Pots over 7" → Deep recommended.
| Pot size | Feet (in) | Proper tray | Type | Spare on short side |
|---|---|---|---|---|
| 2" | 1.39 × 1.39 | 4" | Shallow or Deep | 29 mm |
| 3" | 2.04 × 2.04 | 5" | Shallow or Deep | 26 mm |
| 4" | 2.70 × 2.70 | 6" | Shallow or Deep | 26 mm |
| 5" | 3.37 × 3.37 | 7" | Shallow or Deep | 24 mm |
| 6" | 4.03 × 4.03 | 8" | Shallow or Deep | 24 mm |
| 7" | 4.70 × 4.69 | 9" | Shallow or Deep | 23 mm |
| 8" | 5.36 × 5.35 | 10" | Deep | 20 mm |
| 9" | 6.02 × 6.02 | 10" | Deep | 3 mm (snug) |
| 10" | 6.69 × 6.69 | None | — | Feet wider than the largest tray floor (−14 mm) |
Spare = tray inside floor minus foot size, on the tighter (short) side. "Fits with spare" standard is ~20 mm or more.
Share

The pots I ordered are great. Good quality and exactly as described. Make sure you plan for the lead time. It was 3 or 4 weeks from the time I ordered the pots until I received them. I missed that part in the item description. I knocked 1 star off because I did shit an email out and got no response back. Just be aware of that.
Other than that. Treeigami is a great business, and I'd probably order from them again in the future.
Great Stu!
all of these 3-d printed pots are great !!!